How does GPS work when you open a map on your phone and see the blue dot showing your position almost instantly? The answer begins with satellites more than 20,000 kilometres above Earth, exceptionally precise atomic clocks and radio signals travelling through space at close to the speed of light. The most surprising ingredient, though, comes from Albert Einstein’s physics: time does not pass at the same rate for a clock on Earth and one in orbit.
If engineers ignored that difference, satellite-based distance measurements would accumulate errors incompatible with precise navigation. According to the National Institute of Standards and Technology (NIST), the effects of relativity mean GPS clocks gain, overall, about 38 microseconds per day compared with reference clocks on Earth. That may sound negligible until time is converted into distance: a light signal travels almost 300 metres in a single microsecond.
This guide explains the invisible physics behind GPS, step by step: what satellites transmit, how a phone calculates distances, why at least four signals are normally used, where special and general relativity come in, and why a location can become unreliable between tower blocks or indoors. It also distinguishes GPS from Galileo and GNSS, explains what works without internet access, and addresses the idea that navigation satellites automatically track every phone.
InfoBuz editorial research: 22 October 2026. The main sources are NIST, ESA, the EU Agency for the Space Programme (EUSPA), GPS.gov and the Federal Aviation Administration (FAA). Rounded numerical values are physical reference points for the GPS system and do not represent guaranteed accuracy for every phone.
How GPS works, explained in 60 seconds
A navigation satellite continuously broadcasts a radio message containing information about when the signal was transmitted and the satellite’s position. The phone receives the signal, estimates how long it took to arrive and multiplies that interval by its propagation speed. The result is an estimate of the distance to the satellite, known in practice as a pseudorange, because it also includes clock and propagation errors.
Using several such distances and the corresponding satellite positions, the receiver calculates a point in space. In ordinary navigation, four satellites make it possible to determine three spatial coordinates and the receiver clock error. More satellites can improve the geometry and robustness of the solution. This is the basic principle explained by the European Space Agency (ESA).
Your phone does not ask each satellite, “Where am I?” Satellites are essentially transmitters of time and orbital reference data. The position calculation takes place in the receiver, which may combine the result with Wi-Fi networks, mobile-phone towers and sensors to show a more stable location on a map.
1. More than 20,000 km up: where GPS satellites are
GPS satellites operate in medium Earth orbit (MEO), around 20,200 km above the surface. A satellite completes roughly two orbits each day, according to GPS.gov. The orbits are arranged so that users can see several signal sources from almost anywhere in the world.
They are not the same satellites that broadcast television from geostationary orbit, nor do they hover motionless above a city. They are constantly moving, and the receiver needs to know where each satellite was when it transmitted its signal, not where it appears in a photograph.
The GPS system has three parts: the space segment (the satellites), the control segment (ground stations that monitor and update parameters), and the user segment (receivers in phones, vehicles and professional equipment). An official description is available from NASA.
This is why the idea that every phone needs its own large satellite antenna is mistaken. The signals are designed for ground reception by compact equipment, although they are very weak by the time they reach Earth.
2. A phone measures time, not distance with a tape measure
Imagine a satellite sending a time-stamped message and a receiver observing its arrival. If the propagation interval were known perfectly, the basic relationship would be:
Distance ≈ speed × time. For electromagnetic signals in a vacuum, the relevant speed is the speed of light: approximately 299,792,458 metres per second. Time and distance are directly linked: a minute delay can materially change the result.
| Hypothetical timing error | Approximate equivalent distance | What it means |
|---|---|---|
| 1 second | 299,792 km | An error wholly incompatible with navigation |
| 1 millisecond | 300 km | Far beyond the scale of a city |
| 1 microsecond | 300 m | Already too large for precise orientation |
| 10 nanoseconds | 3 m | On the scale of errors that matter to a receiver |
| 1 nanosecond | 0.30 m | A benchmark for the need for synchronisation |
Educational calculation using the speed of light in a vacuum, rounded. This is not a table of final positioning error, which depends on visible satellites, corrections, the atmosphere and the algorithm.
In Earth’s atmosphere, signals acquire additional delays and the receiver must apply corrections. The phone’s clock is also not perfectly synchronised with atomic clocks. In practice, the phone works with pseudoranges and a model that estimates its position and these errors simultaneously.
3. Why four satellites rather than only three?
The problem can be understood through circles and spheres. If you know the distance to a single satellite, you could be anywhere on a sphere centred on it. Two distances narrow the possible locations to the intersection of two spheres; a third distance narrows the possibilities further.
In an ideal geometric exercise, three distances can fix a point in space if time is known exactly and certain ambiguities are resolved. But an ordinary phone does not carry an atomic clock synchronised with that degree of precision. There are four practical unknowns: latitude, longitude, altitude and the receiver clock error—more rigorously, three Cartesian coordinates and a clock offset.
This is why the FAA and ESA explain the use of at least four satellites in a standard positioning-and-timing solution. For a real phone, receiving more satellites is often preferable because it helps reduce sensitivity to errors and enables better geometry.
The technique is called trilateration: locating a position through distances from known reference points. It is not the same as triangulation, which relies chiefly on angles. The terms are often confused in everyday language.
4. Einstein in your phone: special relativity slows the satellite clock
Under special relativity, a clock moving relative to an appropriate reference frame runs more slowly than a reference clock, once relative speed is taken into account. GPS satellites travel at about 3.9 km/s in orbit. The motion effect causes a satellite clock to lose around 7 microseconds per day compared with the relevant ground reference.
This does not mean astronauts or people aboard a satellite would experience time as if in a slow-motion film. A clock travelling with an observer operates normally locally. The difference appears in rigorous comparisons between clocks in different states of motion.
For related reading, see The invisible UV-light-activated tattoo: how PhotoTat works and its potential medical applications, an article that develops an aspect directly related to this subject.
This is the first component of the GPS balance, confirmed by NIST. On its own, however, it does not explain the final result, because gravity produces a larger effect in the opposite direction.
5. General relativity speeds up the satellite clock: gravity matters
General relativity shows that the rate at which clocks run also depends on gravitational potential. Compared with a clock on Earth’s surface, a clock in the region of weaker gravity occupied by GPS satellites tends to run faster. This difference contributes approximately 45 microseconds per day.
Although the satellite moves quickly, the gravitational effect is larger than that associated with its speed. The two corrections therefore do not cancel out. NIST gives the net result as a difference of about 38 microseconds during each Earth day.
| Relativistic effect for GPS | Approximate difference from the ground reference |
|---|---|
| Orbital motion — special relativity | −7 microseconds/day |
| Gravitational potential — general relativity | +45 microseconds/day |
| Net balance | +38 microseconds/day |
The “+” sign indicates a satellite clock running faster than the reference; “−” indicates one running more slowly. The values are rounded and describe the main systematic effects, not the only corrections needed in a real system. Source: NIST.
The principle raises another question: two atomic clocks, one at sea level and another at altitude, do not run at perfectly identical rates. The differences are far too small to observe without specialised instruments, but they matter when precise positioning relies on signal travel time.
6. What would 38 microseconds mean if engineers did not compensate for it?
Consider an order-of-magnitude calculation. In 38 microseconds, light travels approximately 11,392 metres, or 11.4 kilometres. That is the distance equivalent of a 38-microsecond time offset in the raw measurement of a pseudorange.
A common misunderstanding needs a warning: it is not correct to say that every phone would display its position as exactly 11.4 km more inaccurate after 24 hours. The final error depends on whether different errors are common to, or differ among, satellites, as well as clock adjustments, geometry and algorithms. The 11.4 km figure describes a physical time-to-distance conversion, not a guaranteed prediction for the blue dot.
GPS satellites and their control segment incorporate relativistic corrections in their design and operation. Some adjustments to the nominal clock rate are designed in before launch, while the receiver applies other corrections, including those for orbital and propagation characteristics. GPS does not simply “forget” Einstein for a day and then correct the error in one operation.
If time-measurement technology interests you, InfoBuz has also explained how a nuclear clock could become a reference point for future navigation systems.
7. Why atomic clocks are at the heart of satellite navigation
An atomic clock does not “see atoms moving like hands on a dial”. It uses highly stable frequencies associated with transitions between energy states of atoms or other atomic systems. That stability is essential when comparing intervals measured in nanoseconds.
The ESA describes how Galileo satellites use atomic clocks and transmit time and position information. The European satellites use rubidium frequency standards and passive hydrogen masers, according to the ESA’s technical explanation.
A phone, by contrast, does not need to carry the same atomic equipment. With the signals it receives, it estimates its own clock error. That is one reason the fourth satellite measurement matters so much.
The clocks are not left unmonitored. Networks of monitoring stations continually compare data, detect drift and provide system updates. EUSPA explains the role of the ground segment in GNSS timing and synchronisation.
8. Earth’s rotation also matters: the Sagnac correction
While a radio signal travels from satellite to receiver, Earth rotates. Treating the coordinates of a ground receiver as though the reference system were entirely stationary would introduce errors. The correction associated with the Sagnac effect accounts for propagation geometry in a rotating system.
This detail is more technical than the simple “45 minus 7 equals 38” relationship, but it shows that relativity in GPS is not limited to a single clock adjustment. An in-depth analysis published in Living Reviews in Relativity, along with NIST material, also describes corrections for eccentric orbits, Earth’s rotation and synchronisation from the perspective of different reference systems.
A phone user does not need to calculate Sagnac terms. Receiver engineering and navigation messages include the required mechanisms. The key point is that a map position results from several physical and mathematical corrections, not simply from counting satellites.
9. GPS does not mean every satellite: Galileo, GLONASS and BeiDou
GPS is the satellite-navigation system operated by the United States. The generic name for global satellite positioning and timing systems is GNSS, or Global Navigation Satellite System. The best-known global constellations are GPS (United States), Galileo (European Union), GLONASS (Russia) and BeiDou (China).
Most modern phones can receive signals from several constellations. EUSPA explains Galileo’s interoperability with other systems. So when you say GPS is enabled on a phone, its chip may in practice also use Galileo or BeiDou satellites, depending on the model, available signals and reception conditions.
| System | Operator | What it means for a phone |
|---|---|---|
| GPS | United States | Time and position reference points delivered by radio signals |
| Galileo | European Union | Compatible signals used by multi-GNSS receivers |
| GLONASS | Russia | Another global constellation that may be received |
| BeiDou | China | Another source of satellite measurements for compatible receivers |
Using several constellations can improve the number of visible satellites and the geometry of a solution. It does not automatically mean perfect accuracy: buildings, propagation errors and antenna quality still matter. Signals from different systems also require differences between their time scales to be addressed.
10. Why GPS works without internet, but the map may not
Receiving GNSS signals does not in itself require a mobile or Wi-Fi connection. Satellites broadcast the signals, and the receiver can calculate a position without sending data to them. A compatible phone or navigation device can therefore obtain coordinates in an area without mobile-data coverage, provided it has sufficient view of the sky and the information required for reception.
There is, however, a difference between calculating coordinates and displaying a map with roads, names and routes. Apps may need previously downloaded data or internet access for maps, traffic information and destination searches. Before travelling without coverage, download offline maps in an app that supports them.
Internet access can also help a position fix start more quickly through auxiliary information, a method generically known as assisted GNSS. The lack of a network does not physically stop satellite reception, but it can make the first position fix take longer in some circumstances. Different phone models perform differently.
GPS is not the same as a maps application or online access. The distinction matters when relying on a phone while hiking or travelling, and it explains why independent orientation tools, such as marked trails and an offline map, are useful.
11. Why the blue dot jumps between buildings or in underground car parks
In open spaces with a clear view of the sky, an ordinary phone can obtain a good location fix. GPS.gov gives typical accuracy of around 4.9 metres for phones under open sky as a reference, but stresses that results depend on the receiver and conditions. It is not a guarantee for every device or location.
In cities, radio signals can be blocked or reflected by buildings. The receiver may then measure a longer propagation path than the direct one—an effect called multipath. Indoors, on the metro, in car parks or between tall buildings, signals can become very weak or arrive from unsuitable directions.
The satellites’ positions relative to one another also matter. If the received satellites are clustered in a narrow part of the sky, measurement geometry can produce a poorer estimate than if they are well distributed. Delays caused by the ionosphere and troposphere also occur; these are partly corrected through models and the use of multiple frequencies.
If the map places you on a parallel street, the signal may be the problem, but map data can also be wrong. GPS.gov notes that a misrepresented street does not prove the satellites are malfunctioning. For direction-finding, see InfoBuz’s article on the difference between magnetic north and geographic north.
12. Why newer phones can use two frequencies
Some modern receivers can receive GNSS signals on two or more frequency bands. Because ionospheric effects depend on frequency, comparing them can allow more accurate compensation for delays. Data from multiple constellations can provide a larger set of measurements.
EUSPA explains the use of multiple constellations and dual-frequency receivers in phones. Actual results, however, vary with the antenna, chip, environment and software processing. A phone with impressive specifications cannot magically overcome a tunnel, a massive building or radio interference.
In professional measurement, specialised instruments can achieve much better accuracy through equipment, corrections and methods such as RTK, but these are not accuracy levels guaranteed by a consumer smartphone. Nor should the accuracy shown beside a blue dot be confused with certified geodetic measurement.
13. GPS, location and privacy: does the satellite know where you are?
Not in the sense often implied in conversations about tracking. In normal operation of the open system, GPS and Galileo satellites broadcast reference signals to receivers. A phone does not need to transmit its position back to a navigation satellite in order to locate itself.
GPS.gov explicitly explains that GPS satellites do not track devices on the ground. Similarly, EUSPA states that Galileo does not automatically receive the location calculated by the user’s phone.
Apps and internet-connected services may nevertheless process or transmit location, depending on their permissions and functions. It is important to distinguish between physically receiving a satellite signal and transmitting data to a navigation app, a location-sharing service or an online platform.
It is useful to check app permissions and location-sharing services regularly. If a phone is lost, other connectivity and account mechanisms may make it possible to find it; that does not mean GPS “calls” it from orbit. InfoBuz explains the practical steps in its guide to a lost or stolen phone.
14. What does GPS have to do with 112, aviation, banks and the internet?
GNSS technology matters for more than finding a restaurant. It can support aircraft and ship navigation, transport, agriculture, geodetic measurement, industrial equipment and precise clock synchronisation in critical infrastructure. EUSPA describes GNSS timing uses in communications, financial systems and energy.
In Romania, emergency-call location can combine different available data, and accuracy depends on the technology and information used. A phone that supplies coordinates cannot guarantee automatic identification of a building entrance or access to a person. Read InfoBuz’s analysis of locating calls to 112, Romania’s emergency number, and its explanation of why the operator also needs directions from the caller.
Satellite timing is also useful for systems that need compatible time references. That is why a propagation, interference or synchronisation problem is not merely an inconvenience for drivers: it can affect activities in which precise time is an invisible infrastructure.
Separately, time standards such as UTC have their own rules and synchronisation issues. InfoBuz has examined the debate over the leap second and UTC. UTC adjustments should not be confused with the 7- and 45-microsecond relativistic effects discussed here.
15. What can disrupt GNSS: from solar storms to jamming and spoofing
GPS can work very well on an ordinary day and encounter problems in special conditions. GPS.gov lists obstructions, reflections, atmospheric conditions and, more rarely, radio interference, jamming and significant solar storms among possible causes of error.
Jamming can prevent reception of navigation signals. GNSS spoofing refers to the use of false signals intended to influence a calculated position. The term should not be confused with falsifying the phone number displayed during a call, although both use the word spoofing.
Not every sudden map error is evidence of an attack. Between tall buildings or near a metal wall, reflected signals may offer a much simpler explanation. For an account of what can happen in extreme conditions, read InfoBuz’s research on the effects of a major solar storm on GPS and infrastructure.
A simple experiment: understanding trilateration with paper and a compass
To understand the logic of positioning, draw three fixed points on a sheet of paper, labelled A, B and C, spread as evenly as possible. Use a compass to draw circles of different radii around those points. The places where the circles intersect represent candidate positions consistent with the distances.
Add a fourth condition or a small error to one radius, and observe how the intersections change. In a real system the spheres are three-dimensional and the receiver also solves for its clock offset, so the paper exercise is only an analogy, not a complete GPS simulator. GPS.gov also presents an official trilateration activity, explicitly simplified for learning.
You can observe an equally instructive effect in a map application: without putting yourself at risk, compare the stability of your position under open sky with that near tall buildings. Do not rely on this experiment for professional surveying or road safety; its purpose is to show that geometry and environment influence the estimate.
Frequently asked questions about GPS, relativity and satellites
Why does time pass faster on a GPS satellite?
At GPS altitude, gravity makes the clock run around 45 microseconds per day faster than the ground reference, while orbital speed makes it run around 7 microseconds slower. The result is approximately +38 microseconds per day.
Would GPS work without relativity theory?
Not at the level of accuracy for which it is designed, if relativistic effects were ignored. The system includes clock-rate corrections and other physical adjustments needed for navigation.
Would GPS be wrong by 11 km per day without correction?
A timing error of 38 microseconds is equivalent to about 11.4 km in a raw calculated pseudorange at the speed of light. But that is not a direct, universal prediction of the displayed position error in a real receiver.
Why does a phone need four satellites?
To estimate three spatial coordinates and a clock error in an ordinary GNSS solution. More satellites can improve robustness and geometry.
Does a phone have an atomic clock?
It does not need one. The receiver uses time information from satellite signals and estimates its own time offset during the calculation.
Does GPS work without internet and without a SIM card?
A compatible GNSS receiver can receive signals and calculate coordinates without a mobile-data connection. Maps, address searches, traffic information or a fast start may require downloaded data or connectivity, depending on the app.
What is the difference between GPS and Galileo?
GPS is the US system; Galileo is the European system. Both are GNSS systems, and multi-GNSS phones can use signals from multiple constellations.
Why does my phone locate me incorrectly between buildings?
Buildings can block or reflect signals (multipath). Accuracy also depends on satellite geometry, atmospheric conditions, antenna and software.
Do GPS satellites track my phone?
In normal operation, no: satellites broadcast one-way navigation signals and do not automatically receive the position calculated by the phone. Connected apps may process or share location under the permissions and services being used.
Why does GPS matter to banks and mobile networks?
In addition to coordinates, GNSS provides precise time references that are useful for synchronising infrastructure in telecommunications, energy and financial services.
Can a solar storm affect satellite positioning?
Yes. Ionospheric disturbances can change signal propagation, and intense events can increase errors or affect reception in certain conditions. That does not mean every solar storm stops global navigation.
Scientific and institutional sources
- NIST — relativity in GPS; −7, +45 and +38 microseconds per day.
- NIST — how location is measured using GPS.
- GPS.gov — the GPS constellation and orbital altitude.
- GPS.gov — accuracy, multipath and sources of error.
- FAA — the four measurements and receiver clock error.
- ESA — trilateration explained.
- ESA — Galileo atomic clocks.
- EUSPA — GNSS and smartphones.
- EUSPA — multi-GNSS and privacy.
- Living Reviews in Relativity — detailed technical explanation.
- NASA Scientific Visualization Studio, March 2026 — GNSS orbital visualisation.
The NASA image used as a visual illustration in this article: “Global Navigation Satellite System (GNSS) Fleet”, NASA SVS, 19 March 2026; visualisation by Kel Elkins (Science and Technology Corporation). The orbits are graphically represented, not photographed simultaneously. Source: NASA SVS.
Conclusion: the blue dot on the map is a daily demonstration of physics
How does GPS work? Through a combination of atomic clocks, radio signals, three-dimensional geometry, atmospheric models and relativistic corrections. Each time it calculates a location, the receiver interprets messages from distant satellites, estimates signal travel time, and simultaneously solves for coordinates and the error in its own clock.
The difference of 38 microseconds per day between the rate of GPS clocks and the ground reference is one of the most striking practical illustrations of relativity. But the performance seen on a phone also rests on the other steps: four or more satellites, corrections for the atmosphere and Earth’s rotation, and receivers able to combine the information.
The next time a map shows your location, it is worth remembering that the blue dot is more than a digital marker: it is the result of an unseen collaboration between space engineering, mathematics and theories of time formulated more than a century ago.








Discuția cititorilor
Ai o opinie sau o întrebare despre acest articol? Spune-ne ce crezi.
Fii primul care deschide discuția.
Te rugăm să păstrezi un limbaj civilizat și să discuți la subiect. Comentariile spam sunt filtrate automat.