Your electricity bill, line by line: how to compare two offers without paying more in 2026

Your electricity bill, line by line: how to compare two offers without paying more in 2026

Rating
—/5 0 ratings
Follow us on Google News
How To7 min readUpdated 14 October 2026

Updated: 14 October 2026 la 02:55. Articolul a fost revizuit pentru a reflecta informațiile disponibile la această dată.

Two electricity offers may display different prices, but the offer that appears cheaper does not always result in the lower final bill. The real cost depends on the energy price, applicable tariffs and taxes, any subscriptions or fixed fees, and how consumption is measured. Before changing supplier, you need to understand several lines on your current bill.

To supplement the information above, you can also read Bought a used car? The two deadlines that can hold up your paperwork: 30 and 90 days, an article that examines an aspect directly related to this topic.

Romania’s National Energy Regulatory Authority (ANRE) publishes a guide to the information that must appear on an electricity bill and provides access to its offer-comparison tool. The explanations below are general; contract terms and regulations may be updated, so check the offers actually valid on the date you make your choice.

Electricity bill: start with the supply point details

The bill includes information about the account holder, supply point, billing period, supplier and distribution network operator. In practice, an identification code for the supply point is needed for many contract-related procedures. Check that the document corresponds to the address and period for which you expect to pay.

Do not post a full photograph of your bill online if it shows personal data, contract identifiers, customer codes or other information that could link the bill to your home. For a public comparison, retain only the relevant figures and remove sensitive information.

Five lines needed for a proper comparison

Bill item What to understand
Billing period The interval for which consumption and services are calculated
Opening and closing meter readings The values used to determine the quantity of energy
Consumption in kWh The number of units billed
Price and other components The energy cost and applicable regulated and tax components
Total due and due date The final amount payable and payment deadline

ANRE states that the bill includes information on the services billed, the meter-reading interval, payment methods and links to the offer comparator. Presentation details may differ between suppliers, but the essential information should be identifiable.

Actual, self-reported or estimated meter reading: why it matters

If a supply point is billed on an estimated basis, the bill may differ from actual usage during that period. A self-reading submitted according to the instructions, or a reading taken by the distribution network operator, can help bring the billed quantities into line. A reconciliation bill may correct the difference between estimated consumption and consumption established through a meter reading.

Check the section stating the type of meter reading and compare the values with the meter’s history. If in doubt, use the supplier’s or distributor’s official complaint channels, depending on the nature of the issue. Do not assume that every high-consumption figure means theft or a meter error.

Calculation example: 230 kWh in one month

The following figures are hypothetical, not current market tariffs. Assume two offers with a comparable all-in final price, expressed in lei/kWh, with no additional fixed subscription and no other contractual differences that would alter the cost.

Hypothetical offer Final price used in the example For 230 kWh
A 0.95 lei/kWh 218.50 lei
B 1.15 lei/kWh 264.50 lei
Difference 0.20 lei/kWh 46.00 lei/month

The calculation is 230 × 0.95 = 218.50 lei, and 230 × 1.15 = 264.50 lei, respectively. If the difference remained in place for a full year, with the same monthly consumption, it would amount to 552 lei. But a real bill is not necessarily that simple: there may be fixed components, other conditions or different seasonal consumption.

The fixed-fee trap: why a low kWh price can cost more

Imagine offer C, at 0.90 lei/kWh with a subscription fee of 0.50 lei a day. For 230 kWh over 30 days, the example cost is 207 + 15 = 222 lei. It is more expensive than offer A in the table, even though its price per kWh is lower. The example shows why you should compare the total cost for your own consumption, not just the first figure highlighted in an advert.

At low consumption, fixed components can carry greater weight in the effective average price. At high consumption, the per-kWh difference may become the dominant factor. Check the contract term, any price-adjustment mechanisms and what happens after a promotional offer expires.

Where to compare offers: the ANRE-recommended platform

ANRE points consumers to the POSF platform to compare offers and change supplier. Enter your customer type, area and the required parameters, then review the results, documents and full terms. A comparator is a screening tool, not a guarantee that every offer suits your circumstances.

Before deciding, download the commercial offer and the contract terms in the version valid at that time. Look for the period during which the price applies, any fixed component, payment terms, any associated services and the mechanisms for changes.

Six mistakes that can cancel expected savings

  • Comparing a price excluding taxes with a final price including all components.
  • Ignoring a monthly or daily subscription fee.
  • Using consumption from a single atypical month to estimate the entire year.
  • Confusing an estimated meter reading with final reconciled consumption.
  • Comparing different billing periods and distribution areas.
  • Signing a contract without checking its duration and the conditions for price changes.

What to do if your bill is much higher than expected

Compare the meter readings, period, type of reading, seasonal consumption and any previous balances. The amount may include a reconciliation or unpaid sums. If the number of kWh appears unjustified, ask for an explanation in a written complaint and retain the documents.

Do not attempt to dismantle, seal or interfere with the meter or electrical installation. Metering and technical checks are carried out by the competent entities. For consumer rights and procedures, use ANRE information.

An attractive price is not the only selection criterion. It is also worth checking the quality of dealings with the supplier: how clear its bills are, communication, support channels and any publicly available complaint record. InfoBuz has separately examined ANRE’s supplier assessment system, which adds a perspective on service performance.

Final checklist before switching

  1. Identify your average monthly consumption from at least several bills.
  2. Note the final price, fixed components and your current contract.
  3. Use the official comparator with your own parameters.
  4. Open the full terms for the selected offers.
  5. Calculate three consumption scenarios: low, usual and high.
  6. Check the validity period and contractual procedure.
  7. Keep confirmations and photographs of meter readings where relevant.

A sound comparison does not answer “which offer has the lowest number?”, but “which offer best suits my consumption and the terms I accept?” An informed decision can be made without complicated formulas, but not without reading the contract.

Frequently asked questions

Is the price on the first page of the offer the final price?

Not always. Some offers highlight only the active-energy component, while the final bill also includes other regulated or tax components. Compare the total cost for your consumption and conditions.

Why am I receiving a reconciliation bill?

A reconciliation may arise when estimated consumption differs from consumption established through meter readings. Check the readings, periods and amounts already paid. If you see a discrepancy, ask the supplier for an explanation.

Does changing supplier require changing the meter?

Usually, the commercial supplier and the distribution network operator have different roles. However, the specific procedure depends on the supply point and the circumstances; check ANRE’s explanations and the contract before assuming that technical intervention is required.

Can a fixed subscription change which offer is best?

Yes. An offer with a lower per-kWh price can become more expensive at low consumption if it includes a daily or monthly charge. For comparison, add all comparable components and calculate scenarios over several months.

Sources and methodology

Etichete: ANREelectricityElectricity billElectricity priceSupplier switch
Share this article
COMUNITATEA INFOBUZ

Discuția cititorilor

Ai o opinie sau o întrebare despre acest articol? Spune-ne ce crezi.

0 comentarii

Fii primul care deschide discuția.

Lasă un comentariu

Email address este vizibilă doar administratorilor și nu va fi publicată. Câmpurile marcate cu * sunt obligatorii.

Te rugăm să păstrezi un limbaj civilizat și să discuți la subiect. Comentariile spam sunt filtrate automat.