PFAS in Dobruja’s drinking water: since January 2026, European Union rules have required harmonised monitoring of persistent chemicals often referred to as “forever chemicals”. In Constanța and Tulcea, public reports contain analyses for numerous water indicators. But can readers determine from the documents available online exactly what was measured for PFAS, at which point, with what limit of quantification and with what result?
We compared the legal requirements with the public analysis pages of RAJA Constanța and AQUASERV Tulcea, including two AQUASERV bulletins from October 2026, one for the city of Tulcea and another for localities in the county. We did not find separately presented PFAS results in the materials reviewed. This absence from the public sample reviewed establishes neither that the water is contaminated nor that the operators or public health directorates did not carry out analyses. It is a question of transparency that requires additional documents.
For more information about Constanța, see Hepatitis A outbreaks in Constanța and across Romania: what the figures actually show, which provides complementary details on this subject.
This article does not publish a “contaminated water map”, because such a map would not be supported by georeferenced, comparable PFAS bulletins for all drinking-water supply systems in Dobruja. Instead, it documents what can be verified, what is missing and how a laboratory result should be read, without alarmism.
PFAS in Dobruja’s drinking water: what changed in 2026
On 12 January 2026, the European Commission announced the application of obligations for systematic PFAS monitoring in drinking water under Directive (EU) 2020/2184. Member states must monitor relevant parameters, report exceedances and incidents, and take measures to protect the public when applicable values are breached.
Romania transposed the requirements through Government Ordinance No. 7/2023 on the quality of water intended for human consumption. Article 22 sets 1 January 2026 as the national deadline for compliance with the values for certain new parameters, including “PFAS total” and “sum of PFAS”. The national compliance date and the European application date should be stated separately, rather than treated as a single date.
| Legal parameter | Parametric value | Conversion | What it represents |
|---|---|---|---|
| Sum of PFAS | 0.10 µg/L | 100 ng/L | The sum of a defined set of 20 PFAS compounds |
| PFAS total | 0.50 µg/L | 500 ng/L | A broader aggregate parameter, defined separately |
| 1 µg/L | – | 1,000 ng/L | A unit conversion, not a legal limit |
The two limits are different parameters. They must not be added together, and a laboratory that determines only a few PFAS compounds has not automatically demonstrated compliance with the full set of 20 required for the “sum of PFAS”. Likewise, “not detected” does not mean that there are exactly zero molecules of the substance: the result must be interpreted in relation to the method’s performance.
What PFAS are and why they are monitored
PFAS refers to a very broad family of per- and polyfluoroalkyl substances used in certain industrial applications and products for properties including resistance to water, grease or heat. Some persist in the environment, and certain substances can remain in the body. There are, however, important differences between compounds in toxicity, mobility, bioaccumulation and the available body of evidence.
Potential sources include certain industrial processes, waste, historical uses of firefighting foams and other activities. We do not state that a facility, port, airport or business in Dobruja is the source of a specific contamination event: such an attribution would require sampling, a series of analyses, hydrogeological investigations and an assessment of pollutant pathways.
European risk assessments concern cumulative exposure from several sources, including food and water, and effects that depend on the compound and dose. The presence of a compound at a measurable concentration is not the same as demonstrating disease in an individual. Conversely, transparency in monitoring remains important even where no known incident exists.
Public-document audit: what RAJA and AQUASERV publish
RAJA Constanța’s “Analyses” page explains how operational and audit monitoring is organised, with locations and frequencies set in programmes overseen by public health directorates. Water-quality documents and chemical or microbiological parameters are published. From the documents accessed for this review, we could not construct a separate PFAS dataset identifying substances, results and methods for each water-supply area in Constanța.
AQUASERV Tulcea publishes monthly analysis bulletins. On the date of review, the page listed two monthly files for several months in 2026, including October. We examined two October documents: one for the city of Tulcea and one for Isaccea, Revărsarea, Măcin, Carcaliu and Grindu. The visible bulletins report indicators including pH, conductivity, turbidity, residual chlorine and other chemical or microbiological parameters, but we did not identify a separate entry for “PFAS total” or “sum of PFAS” in those two documents.
| Institution/document | What we could confirm | What cannot be stated from the document reviewed |
|---|---|---|
| RAJA – Analyses page | A monitoring programme and explanations of the types of analyses exist | We do not have a complete table of PFAS results for every water-supply area |
| AQUASERV – city of Tulcea, October 2026 | A monitoring bulletin for sampling points in the city | The bulletin does not show separate PFAS values |
| AQUASERV – county, October 2026 | A bulletin with points in Isaccea, Revărsarea, Măcin, Carcaliu and Grindu | The lack of a PFAS entry does not amount to proof that all possible analyses were not performed |
| Tulcea Public Health Directorate – report reviewed for 2025 | Aggregate data on drinking-water surveillance | It is not a complete inventory of PFAS samples for 2026 |
The institutional distinction also matters: operational monitoring associated with water supply is not the same as audit monitoring and the work of the health authority. A result may exist in an external laboratory or in a report submitted to the Public Health Directorate (DSP) without being reproduced in full in every monthly bulletin published by the operator. Verifying compliance requires official answers and monitoring programmes, not assumptions based on a PDF alone.
What is needed to say PFAS are within the limit in a locality
- The exact water-supply area, including the name of the source and sampling point; the county name alone is not enough.
- The date and time of sampling, to identify the period to which the result relates.
- The compounds tested, including the list of 20 used for the “sum of PFAS” where that is the reported parameter.
- The concentration and unit (µg/L or ng/L), rather than only a general statement that it is “compliant”.
- The method’s limit of quantification (LOQ) and the laboratory that carried out the analysis.
- The applicable parametric values and measures taken, if there are exceedances.
- The monitoring frequency and programme overseen by the competent authority.
Without these indicators, a rigorous comparison cannot be made between Constanța, Tulcea, a village supplied by wells and another system supplied from different sources. A sample from a network does not describe all households in the county. Similarly, water from a private well is not automatically represented by the report of a public-network operator.
Limit of quantification: the difference between “not detected” and “zero”
The European Commission’s 2024 technical guidance explains the requirements for the limit of quantification (LOQ). For regulated parameters, the minimum criterion is that the LOQ must be no more than 30% of the relevant parametric value. In the guidance example, this corresponds to 30 ng/L for the “sum of PFAS” and 150 ng/L for “PFAS total”, at the level of the criteria applicable to the parameters. Each compound and the overall result are assessed according to the analytical method.
| Wording in a bulletin | Prudent interpretation | What else should be asked |
|---|---|---|
| Not detected | The signal is below the method’s stated criterion | What are the limit of detection and limit of quantification? |
| Below the limit of quantification | It cannot be quantified with the required accuracy below that value | What LOQ was used and which compounds were included? |
| 0.06 µg/L, sum of PFAS | A value below 0.10 µg/L, if the analysis corresponds to the legal parameter | The list of compounds, method and sampling point |
| 0.12 µg/L, sum of PFAS | An example above 0.10 µg/L; it would require assessment and measures under the law | Confirmation of the value, the procedure and public notification |
A figure without identification of the parameter can mislead: 0.12 µg/L has a different interpretation depending on whether it represents the “sum of PFAS” or “PFAS total”. That is why a headline such as “PFAS above the limit” should not be published before verifying the limit corresponding to the parameter, the sample and the method.
Why an incomplete table cannot declare water safe or unsafe
A bulletin showing compliant values for nitrates, bacteria, turbidity and residual chlorine provides useful information about the parameters tested. But compliance for those parameters does not automatically establish PFAS values. Conversely, the absence of a PFAS row does not mean the water is unsafe. Both conclusions would go beyond what the documents can demonstrate.
For residents, the accurate message is this: the data reviewed do not allow a complete local conclusion about PFAS concentrations. The result of a documentary investigation may be precisely this transparency gap, provided it is defined accurately and not turned into an unsupported suspicion.
What RAJA, AQUASERV and health authorities should publish for a meaningful comparison
A minimum model for public reporting should include an accessible, regularly updated file for every water-supply area: the area identifier, source, point, sampling date, “PFAS total” and/or “sum of PFAS” parameters, relevant individual substances, result, LOQ, parametric value and laboratory. We do not state that legislation requires this exact structure in CSV format; it is a transparency recommendation that would make the data comparable and reusable.
An explicit summary of measures applied when a sample exceeds a value could also be published: repeat analysis, source investigation, changing the abstraction point, additional treatment and health recommendations. Sample data should not be removed from their context and presented as a “danger map” without expert verification and an assessment of their representativeness.
A template request to institutions: seven precise questions
- 1. Which water-supply areas in Constanța and Tulcea counties were monitored for “sum of PFAS” and/or “PFAS total” in 2026?
- 2. What are the sampling dates, locations, results, units of measurement and parametric values for each sample?
- 3. Which laboratories carried out the analyses, by which methods and with which limits of quantification?
- 4. What monitoring frequency was established through the risk assessment and health approval?
- 5. Were there any non-compliant results or incidents, how were they confirmed, and what measures were taken?
- 6. How can residents consult historical results in an accessible form for their water-supply area?
- 7. Who is responsible for public communication in the event of an exceedance, and what is the local notification procedure?
These questions may be addressed to the operator, the public health directorate and the competent institutions under rules on access to information of public interest. In this article, we do not claim that they have already been sent or that institutions refused to answer; they are presented as a methodology for the next stage of the investigation.
What a family concerned about PFAS in tap water can do
First, establish the source of the water: a public network, an individual well or another system. Ask the operator for information concerning the exact water-supply area. If the water comes from a private well, the public operator’s analyses are not representative of that well. Where there are specific concerns, discuss testing and applicable recommendations with the DSP.
Boiling water does not remove PFAS as a treatment method; evaporation may even increase the concentration of some persistent contaminants in the water left behind. A filter intended for taste, odour or particles does not guarantee PFAS removal. Some activated-carbon or reverse-osmosis systems may reduce certain compounds, but performance depends on the model, certification, installation, flow rate and replacement of filter components.
Look for testing and certification covering PFAS reduction or reduction of specific compounds, rather than simply the label “premium filter”. For details on filtration technologies and standards, see InfoBuz’s guide to activated carbon, reverse osmosis and NSF certifications.
If the health authority issues an official water restriction, follow its instructions exactly. It is not advisable to buy expensive equipment or stop using the public supply solely because a monthly bulletin does not display a PFAS entry.
Frequently asked questions about PFAS and drinking water
Have PFAS above the legal limit been found in Constanța or Tulcea?
From the selected public documents in this audit, we do not have comparable local PFAS results demonstrating an exceedance. We do not state that no other analyses or exceedances exist in authorities’ records. A conclusion requires official results identifying the area, date, parameter and method.
What does it mean if PFAS do not appear in a water bulletin?
It means only that the document does not report them separately. Monitoring may be carried out through another programme or laboratory, with separate publication. The absence of an entry cannot on its own be interpreted as a concentration of zero or as no testing having been done.
What is the EU limit for the sum of PFAS in 2026?
The parametric value is 0.10 micrograms per litre, equivalent to 100 nanograms per litre, for the sum of the 20 compounds specified in the directive. The “PFAS total” parameter has a separate value of 0.50 µg/L.
Why are there two PFAS values?
Because “sum of PFAS” and “PFAS total” are defined differently. A result for one is not automatically a result for the other. The methods and reporting approach should be verified with the laboratory and competent authority.
Does boiling water remove PFAS?
No. Boiling is useful for some microbiological risks in the circumstances recommended by authorities, but it is not a method for removing dissolved PFAS.
Does an ordinary water filter reliably protect me from all PFAS?
No. Performance depends on the technology and the compounds. Check the documentation and certification for reduction of relevant substances, as well as the cartridge’s service life.
Can I compare water from a well in Dobruja with a RAJA or AQUASERV bulletin?
Not without technical justification. The sources may be different, and data from public networks do not automatically represent the composition of water from a private well. A well requires representative sampling and a dedicated analysis.
Where can I obtain PFAS results for my address?
Start by identifying the supplier and water-supply area; request the report with the date, point and parameters analysed. For the exact list of items to track, also read InfoBuz’s guide, “How to check PFAS in your tap water”.
Official sources and limitations of the investigation
- European Commission, 12 January 2026 – application of PFAS monitoring obligations.
- Directive (EU) 2020/2184 on the quality of water intended for human consumption.
- European Commission, technical guidance of 7 August 2024 on PFAS analysis methods.
- Government Ordinance No. 7/2023 – Romania’s drinking-water rules.
- RAJA Constanța – public “Analyses” page, overview of water monitoring.
- AQUASERV Tulcea – public archive of water-quality bulletins.
- AQUASERV – October 2026 monitoring for localities in Tulcea County.
- AQUASERV – October 2026 monitoring for the city of Tulcea.
InfoBuz.ro methodology, 14 November 2026: this investigation is an audit of publicly accessible documents, not a water-sampling campaign or a certified audit of all laboratory records. We did not identify separately reported PFAS results in the sample of bulletins reviewed, and we draw from that observation no conclusion of contamination, compliance or non-performance of analyses by institutions. The numerical examples used to explain the limits are strictly hypothetical. A local verdict would require analyses and official responses for the exact water-supply area.










Discuția cititorilor
Ai o opinie sau o întrebare despre acest articol? Spune-ne ce crezi.
Fii primul care deschide discuția.
Te rugăm să păstrezi un limbaj civilizat și să discuți la subiect. Comentariile spam sunt filtrate automat.