Food packaging faces new EU rules over PFAS chemicals

Food packaging faces new EU rules over PFAS chemicals

Rating
—/5 0 ratings
Follow us on Google News
Health & Lifestyle7 min read

From 12 August 2026, packaging intended to come into contact with food may no longer be placed on the European Union market if it reaches certain PFAS thresholds. The rule is part of Regulation (EU) 2025/40 on packaging and packaging waste, and applies directly in Romania.

For shoppers, the change will not always be visible. There is no general requirement for a pizza box, delivery container, grease-resistant paper or disposable cup to carry a shelf label such as “PFAS-free”. Compliance is checked primarily along the production and distribution chain, through documents, information from suppliers and, where necessary, testing.

In brief: the new limits do not mean that all packaging already in shops suddenly became non-compliant, nor that paper packaging is automatically safer than plastic. The rule concerns specific concentrations and packaging placed on the market after the date on which it applies.

Which PFAS limits for food packaging apply from 12 August 2026?

Article 5(5) of Regulation (EU) 2025/40 provides that food-contact packaging may not be placed on the market if its PFAS concentration is equal to or above any of the thresholds set by the EU legislation:

What is measured Threshold in the regulation What it means
Any PFAS measured by targeted analysis 25 ppb 25 parts per billion; polymeric PFAS are excluded from this measurement.
Sum of PFAS measured by targeted analysis 250 ppb A threshold for the total of the substances measured, under the conditions set out in the regulation.
Total PFAS, including polymeric PFAS 50 ppm 50 parts per million; this is the threshold for the total quantity defined by the regulation.

The units should not be confused: one ppm is 1,000 times larger than one ppb. The three figures therefore do not describe the same type of measurement and cannot be compared directly as though they were three versions of the same test.

PFAS is the name for a very broad family of per- and polyfluoroalkyl substances. Some have been used to make materials resistant to water, oil or grease. Their high persistence in the environment has led to the frequent use of the term “forever chemicals” in public debate, but that term does not indicate whether a particular package meets the legal thresholds.

For more information on PFAS, see How to check PFAS in tap water: the four pieces of information without which a report says nothing about your address, which provides complementary details on the subject.

A fluorine test alone is not a verdict on packaging

The regulation requires further documentation where total fluorine in packaging exceeds 50 mg/kg: the economic operator must be able to provide evidence of the amount of fluorine originating from PFAS and the amount originating from substances that are not PFAS.

This matters because total fluorine is not automatically equivalent to PFAS. The European Commission says in its guidance document on applying the regulation that there is not yet a single harmonised EU-wide methodology for testing PFAS in this packaging. The document recommends a staged check: measuring total fluorine, then, where appropriate, analysing organic fluorine and investigating precursors that may help verify the PFAS limits.

The practical consequence is important: detecting fluorine alone does not automatically demonstrate a breach of the PFAS thresholds. Conversely, a vague commercial claim such as “eco”, “natural” or “paper-based” does not demonstrate the chemical compliance of packaging.

Why the date on the shelf is not always the key date

The Commission guidance distinguishes between packaging already on the market and packaging placed on the market after 12 August 2026. Packaging placed on the market before that date may remain available; the regulation does not introduce a general withdrawal of all older stocks. For consumers, this means the regulation gives no indicated reason to automatically discard packaging bought earlier.

Less intuitively, “placed on the market” does not necessarily mean the day a product reaches a shopping basket. For sales and grouped packaging, the guidance generally identifies the filling stage, as closing or sealing may affect final compliance. Transport and service packaging are generally placed on the market when empty. For imports, the legal reference point is release for free circulation in the EU.

This distinction explains why the immediate effect of the rule is felt mainly by packaging manufacturers, restaurants, own-brand retailers, importers and food producers. For them, the relevant question is whether they can demonstrate supplier compliance for the packaging they are placing on the market now.

Which documents and checks matter in practice?

The regulation does not turn every customer into a laboratory. Technical information is exchanged primarily between economic operators. Depending on their role, they must retain and be able to provide relevant compliance documentation, including identification data and information from suppliers.

Public checks are not limited to visual inspection. Regulation (EU) 2017/625 on official controls permits risk-based checks of documents, traceability, materials and, where justified, sampling and laboratory analysis. Compliance can therefore be checked through documentation, physical inspection or analysis, depending on the risk and the powers of the designated authorities.

Romania’s Ministry of Environment, Waters and Forests published information on the new regulation on 12 August 2026 on its circular economy and packaging page. However, the public sources consulted for this article do not show consolidated national statistics on the number of PFAS controls, samples analysed, laboratories involved or non-compliant products after that date. The absence of this public information does not prove that no controls have taken place; it only means that the public cannot assess their scale from open data.

What buyers can and cannot do

An ordinary consumer cannot tell by looking whether a package contains PFAS or falls within the legal limits. Neither cardboard nor plastic, colour or the feel of water resistance is sufficient evidence. The regulation also does not appear to impose a general requirement for every package to display the result of PFAS testing.

Some realistic limits on interpretation are nevertheless useful:

  • do not assume that a product sold after 12 August 2026 was packaged after 12 August 2026;
  • do not treat a voluntary “PFAS-free” statement as a substitute for compliance documentation or checks by authorities;
  • for packaging regularly purchased by a business, restaurant or institution, the useful question for the supplier is whether it can provide documents demonstrating compliance with Regulation (EU) 2025/40;
  • for a product suspected of being non-compliant, keep the receipt, packaging and identifying details before contacting the retailer or the competent authority.

These rules do not make it possible to estimate an individual’s PFAS exposure from a single item of packaging. Health risk depends on the specific substance, concentration, migration into food, type of food, temperature, contact time and other sources of exposure. The European Food Safety Authority assessed dietary exposure to four PFAS in its 2020 scientific opinion; that assessment cannot be used to diagnose an individual’s risk on the basis of one food container or wrapping paper.

The rule addresses part of the problem, not all PFAS exposure

The limits for food-contact packaging are a specific measure with a defined scope. They are not a blanket ban on all PFAS, do not automatically cover every source of exposure and do not mean that every product containing fluorine is illegal.

The real change is instead one of demonstrable accountability in the commercial chain. For companies, supplier files, the date of placing on the market and the possibility of laboratory verification become more important. For the public, the most useful conclusion is less dramatic: the absence of a label does not mean the rule is absent, but neither does it by itself show that a particular package has been tested.

This article is based on the text of the EU regulation, the European Commission’s implementation guidance, the EU framework for official controls and the Ministry of Environment’s public information. The sources consulted did not identify sufficient public data to state how many packages have been tested or how many PFAS non-compliances have been found in Romania after 12 August 2026.

Frequently asked questions

Do I need to discard food packaging bought before 12 August 2026?

No. The European Commission guidance states that packaging placed on the market before the date of application may remain on the market. The regulation does not provide for an automatic withdrawal of existing stocks.

Does any fluorine detected in packaging mean it contains PFAS above the limit?

No. Total fluorine can also originate from non-PFAS substances. This is why the Commission guidance recommends a staged testing approach, and the result must be interpreted according to the relevant method and legal threshold.

Can I tell from the label whether a food container or pizza box contains PFAS?

Usually not. The regulation does not require a general consumer label stating the result of PFAS analysis. Verification relies mainly on documentation held by operators and checks carried out by authorities.

Sources consulted

Etichete: Food PackagingPFASConsumer protectionRegulation (EU) 2025/40Food SafetyEuropean Union
Share this article
COMUNITATEA INFOBUZ

Discuția cititorilor

Ai o opinie sau o întrebare despre acest articol? Spune-ne ce crezi.

0 comentarii

Fii primul care deschide discuția.

Lasă un comentariu

Email address este vizibilă doar administratorilor și nu va fi publicată. Câmpurile marcate cu * sunt obligatorii.

Te rugăm să păstrezi un limbaj civilizat și să discuți la subiect. Comentariile spam sunt filtrate automat.